Large Eddy Simulation of Bluff Body Stabilized Turbulent Premixed Flame

Authors

  • Nicolas M. Cruz Salvador Instituto Nacional de Pesquisas Espaciais,São José dos Campos/SP
  • Márcio Texeira de Mendonça Instituto de Aeronáutica e Espaço, São José dos Campos/SP
  • Wladimyr Mattos da Costa Dourado Instituto de Aeronáutica e Espaço, São José dos Campos/SP

Keywords:

Computational Fluid Dynamics, Reacting flow, Large eddy simulation, Combustion modeling

Abstract

http://dx.doi.org/10.5028/jatm.v5i2.245

A turbulent reacting flow in a channel with an obstacle was simulated computationally with large eddy simulation turbulence modeling and the Xi turbulent combustion model for premixed flame. The numerical model was implemented in the open source software OpenFoam. Both inert flow and reactive flow simulations were performed. In the inert flow, comparisons with velocity profile and recirculation vortex zone were performed as well as an analysis of the energy spectrum obtained numerically. The simulation with reacting flow considered a pre-mixture of propane (C3H8) and air such that the equivalence ratio was equal to 0.65, with a theoretical adiabatic flame temperature of 1,800 K. The computational results were compared to experimental ones available in the literature. The equivalence ratio, inlet flow velocity, pressure, flame-holder shape and size, fuel type and turbulence intensity were taken from an experimental set up. The results shown in the present simulations are in good agreement with the experimental data.


Downloads

Published

2013-06-01

Issue

Section

Original Papers