Evaluation of Conversion Coatings Without Hexavalent Chromium for Aerospace and Defense Applications

Gregory Morose, David Pinsky, Chandler Humphrey, Kent DeFranco

Abstract


Conversion coatings containing hexavalent chromium are currently used in aerospace and defense manufacturing on various aluminum alloys to provide corrosion protection and enhanced adhesion of subsequent coatings. However, hexavalent chromium is toxic to humans with negative health effects from acute and chronic exposure. Regulatory mandates have accelerated a global effort to replace hexavalent chromium-containing materials because of their toxicity. A consortium was established to evaluate safer conversion coating materials, including the chemical processing of the surfaces prior to applying the conversion coatings. Four conversion coatings without hexavalent chromium were compared against a hexavalent chromium-based conversion coating for the following tests: coating weight, electrical contact resistance, paint adhesion, bare and painted neutral salt fog corrosion tests, painted SO2 salt fog corrosion test, and painted outdoor beachfront corrosion test. The test results for the four conversion coatings without hexavalent chromium were encouraging since several candidates exceeded some of the specification requirements or consortium expectations. In particular, the Socosurf TCS/PACS conversion coating performed well in the coating weight, electrical contact resistance, paint adhesion, and corrosion tests. The results of this evaluation provide significant progress toward providing a replacement material for a traditionally hexavalent chromium material application on aluminum.

Keywords


Conversion coating; Hexavalent chromium; Corrosion test; Paint adhesion; Aluminum alloy

Full Text:

PDF

Refbacks

  • There are currently no refbacks.
';



Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.